Glock disassembly

Back


Glock disassembly

Channel: Sports
Uploaded: June 1, 2006 at 12:44 am
Author: Hank44

Length: 00:07:05
Rating: 4.69
Views: 224500

Tags: Glock disassembly

Video Comments:
Mickstix18 (November 18, 2008 at 11:18 am)
You seem very knowledgeable on the reassembly/assembly.. Any chance you could put together a vid on full "re" assembly of a glock?? As has been stated a few times before, there's some good vids on take down, but none on putting it back together.. Thanks!
jorgeandresmunos (November 12, 2008 at 11:56 am)
The Mag Catch:
Look down in the reciever mag opening. Use a small screwdriver to push the spring-top from left side of reciever to the right. Meanwhile, make sure to hold the mag catch from the right side, otherwise it moves with the spring, so that it won't come out. Once the spring pops out, push the mag catch out from the left to the right. Reassembly: reverse!
jorgeandresmunos (November 12, 2008 at 11:53 am)
Taking out the Slide Lock:
Hold the reciever sideways, tilted with either the left or right side facing the table.
Push down the slide lock spring with a tool / screwdriver. If you push down enough, the slide lock should fall out almost by itself.

If you turn the reciever upsidedown, the slide lock spring will fall out next. May need some shaking.
jorgeandresmunos (November 12, 2008 at 11:49 am)
Dissasembly: From LEFT to RIGHT
Assembly, put pins back in from RIGHT to LEFT. That's the ONLY correct way.
And don't forget, the Locking Block (smaller) pin goes out first AND goes in first. Doing otherwise could screw up your slide stop lever.
jorgeandresmunos (November 12, 2008 at 11:48 am)
PLEASE, DON'T push the pins out from right to left! That's why you need all that hammering.

The trigger pin has double cuts so that it doesn't matter which side goes in first. But if you push it out from left to right, the slide stop lever catches the second cut--> Break out the hammer!!!
160plus (November 9, 2008 at 3:53 am)
Play it in reverse.
160plus (November 9, 2008 at 3:51 am)
Is that Officer Farva!!! Where's your goddamn liter of cola!?!?! lol okay I'm gonna clean my glock now. Thx for the info.
johnintx1 (November 9, 2008 at 3:15 am)
Great video. Please make one showing how to properly clean the Glock and one on how to put it back together. Thanks for a very good lesson!
chulski2 (November 5, 2008 at 7:53 am)
This guy makes it look SO EASY.
reidmeyers (November 3, 2008 at 12:58 am)
whoever started double action triggers is a genius